Structural topology optimization of layout and raster angle for additive
manufacturing technology with the shadow density filter 2021추가
2022년 3월 업로드 (Accept 된 논문 비포함)
[1] H. M. Lee, K. K. Lee, and G. H. Yoon,
"Topography and size optimization of composite structure to control
buckling temperature and thermal buckling mode shape," Thin-Walled Structures, vol. 171, p.
108686, 2022/02/01/ 2022.
[2] J.
Sung, H. M. Lee, G. H. Yoon, S. Bae, and H. So, "One-Step Fabrication of
Superhydrophobic Surfaces with Wettability Gradient Using Three-Dimensional
Printing," International Journal of
Precision Engineering and Manufacturing-Green Technology, 2022/02/22 2022.
[3] D.-Y.
Kim, Y.-J. Woo, K. Kang, and G. H. Yoon, "Failure diagnosis system using a
new nonlinear mapping augmentation approach for deep learning algorithm," Mechanical Systems and Signal Processing, vol.
172, p. 108914, 2022/06/01/ 2022.
[4] K.
H. Kim and G. H. Yoon, "Acoustic topology optimization using moving morphable
components in neural network-based design," Structural and Multidisciplinary Optimization, vol. 65, no. 2, p.
47, 2022/01/18 2022.
[5] G.
H. Yoon, "Transient sensitivity analysis and topology optimization of
particle suspended in transient laminar fluid," Computer Methods in Applied Mechanics and Engineering, vol. 393, p.
114696, 2022/04/01/ 2022.
[6] S.
Hur, H. Choi, G. H. Yoon, N. W. Kim, D.-G. Lee, and Y. T. Kim, "Planar
ultrasonic transducer based on a metasurface piezoelectric ring array for subwavelength
acoustic focusing in water," Scientific
Reports, vol. 12, no. 1, p. 1485, 2022/01/27 2022.
[7] D.
H. Oh and G. H. Yoon, "A Study of Longitudinal Waveguide with Band Gap
Using Cylindrical and Conical Shape Periodic Structure," vol. 11, no. 16, p.
7257, 2021.
[8] G.
H. Yoon, M. Takalloozadeh, and P. Esmailpour, "Stress-Based topology
optimization under the stress relaxation effect," Mechanics Based Design of Structures and Machines, pp. 1-23, 2021.
[9] S.-G.
Sim et al., "Experimental study
of the effect of the boundary conditions of fractured bone," Journal of the Mechanical Behavior of
Biomedical Materials, vol. 124, p. 104801, 2021/12/01/ 2021.
[10] L.
Liu, B. Yi, T. Wang, Z. Li, J. Zhang, and G. H. Yoon, "Investigation on
numerical analysis and mechanics experiments for topology optimization of
functionally graded lattice structure," Additive Manufacturing, vol. 47, p. 102275, 2021/11/01/ 2021.
[11] R.
Sivapuram, R. Picelli, G. H. Yoon, and B. Yi, "On the design of
multimaterial structural topologies using Integer Programming," Computer Methods in Applied Mechanics and
Engineering, vol. 384, p. 114000, 2021/10/01/ 2021.
[12] D.
H. Kim and G. H. Yoon, "Active acoustic absorption device using additive
manufacturing technique for normal incident wave," Applied Acoustics, vol. 178, p. 108006, 2021/07/01/ 2021.
[13] G.
H. Yoon, Y. J. Woo, S. G. Sim, D. Y. Kim, and S. J. Hwang, "Investigation
of bone fracture diagnosis system using transverse vibration response,"
(in eng), Proc Inst Mech Eng H, p.
954411921997575, Mar 11 2021.
[14] M.
Takalloozadeh and G. H. Yoon, "Improvement of a topological level-set
approach to find optimal topology by considering body forces," Engineering Computations 2021.
[15] H.
M. Lee et al., "Modeling and
application of anisotropic hyperelasticity of PDMS polymers with surface
patterns obtained by additive manufacturing technology," Journal of the Mechanical Behavior of
Biomedical Materials, vol. 118, p. 104412, 2021/06/01/ 2021.
[16] H.
S. Koh, J. W. Lee, K. Kwon, and G. H. Yoon, "Development of Post
Processing for Wave Propagation Problem: Response Filtering Method," Applied Sciences, vol. 10, no. 24, 2020.
[17] J.
W. Kim and G. H. Yoon, "Structural optimization scheme for acoustic
cloaking structures considering general surfaces," Engineering Optimization, pp. 1-14, 2021.
[18] G.
H. Yoon and H. So, "Development of topological optimization schemes
controlling the trajectories of multiple particles in fluid," (in eng), Struct Multidiscipl Optim, pp. 1-19, Jan
27 2021.
[19] G.
H. Yoon, "Multiphysics topology optimization scheme considering the
evaporation cooling effect," Computers
& Structures, vol. 244, p. 106409, 2021/02/01/ 2021.
[20] B.
Yi, G. H. Yoon, and X. Peng, "A simple density filter for the topology
optimization of coated structures," Engineering
Optimization, pp. 1-20, 2020.
[21] H.
M. Lee and G. H. Yoon, "Size optimization method for controlling the
buckling mode shape and critical buckling temperature of composite
structures," Composite Structures, vol.
255, p. 112902, 2021/01/01/ 2021.
[22] G.
H. Yoon and S. I. Ha, "A New Development of a Shadow Density Filter for
Manufacturing Constraint and Its Applications to Multiphysics Topology
Optimization," Journal of Mechanical
Design, vol. 143, no. 6, 2020.
[23] W.
Liu, G. H. Yoon, B. Yi, Y. Yang, and Y. Chen, "Ultra-wide band gap
metasurfaces for controlling seismic surface waves," Extreme Mechanics Letters, vol. 41, p. 101018, 2020/11/01/ 2020.
[24] W.
Liu, B. Yi, G. H. Yoon, and H. Choi, "Functionally Graded Phononic
Crystals with Broadband Gap for Controlling Shear Wave Propagation," Advanced Engineering Materials, https://doi.org/10.1002/adem.202000645 vol. 22, no. 12, p. 2000645, 2020/12/01 2020.
[25] W.
Liu, G. H. Yoon, B. Yi, H. Choi, and Y. Yang, "Controlling wave
propagation in one-dimensional structures through topology optimization," Computers & Structures, vol. 241, p.
106368, 2020/12/01/ 2020.
[26] K.
H. Kim and G. H. Yoon, "Aeroacoustic topology optimization of noise
barrier based on Lighthill's acoustic analogy," Journal of Sound and Vibration, vol. 483, p. 115512, 2020/09/29/
2020.
[27] G.
H. Yoon, "Transient sensitivity analysis and topology optimization for
particle motion in steady state laminar fluid," Computer Methods in Applied Mechanics and Engineering, vol. 367, p.
113096, 2020/08/01/ 2020.
[28] G.
H. Yoon, E. M. Dede, T. Nomura, and P. Schmalenberg, "Topology
optimization of time-transient heat conduction for thermo-optic silicon
modulators," International Journal
of Heat and Mass Transfer, vol. 157, p. 119862, 2020/08/01/ 2020.
[29] G.
H. Yoon, B. Yoo, W. K. Kim, J. Woo, T. Kim, and S. Lee, "Multiphysics
simulation of paper curl due to moisture transport," Journal of Mechanical Science and Technology, vol. 34, no. 5, pp.
2075-2083, 2020/05/01 2020.
[30] G.
H. Yoon, A. Donoso, J. Carlos Bellido, and D. Ruiz, "Highly efficient
general method for sensitivity analysis of eigenvectors with repeated
eigenvalues without passing through adjacent eigenvectors," International Journal for Numerical Methods
in Engineering, https://doi.org/10.1002/nme.6442 vol. 121, no. 20, pp. 4473-4492, 2020/10/30 2020.
[31] H.
S. Koh, J. H. Kim, and G. H. Yoon, "Efficient topology optimization of
multicomponent structure using substructuring-based model order reduction
method," Computers & Structures,
vol. 228, p. 106146, 2020/02/01/ 2020.
[32] G.
H. Yoon, "Topology optimization method with finite elements based on the
k-ε turbulence model," Computer
Methods in Applied Mechanics and Engineering, vol. 361, p. 112784,
2020/04/01/ 2020.
[33] S.
I. Ha and G. H. Yoon, "Numerical and Experimental Studies of Pendulum
Dynamic Vibration Absorber for Structural Vibration," Journal of Vibration and Acoustics, vol. 143, no. 1, 2020.
[34] G.
H. Yoon and B. Yi, "A new coating filter of coated structure for topology
optimization," Structural and
Multidisciplinary Optimization, journal article May 25 2019.
[35] J.
W. Lee, J. J. Kim, and G. H. Yoon, "Stress constraint topology
optimization using layerwise theory for composite laminates," Composite Structures, vol. 226, p.
111184, 2019/10/15/ 2019.
[36] J.
W. Lee, J. J. Kim, H. S. Kim, and G. H. Yoon, "Application of a layerwise
theory for efficient topology optimization of laminate structure," Journal of Mechanical Science and
Technology, journal article vol. 33, no. 2, pp. 711-719, February 01 2019.
[37] G.
H. Yoon, H. Choi, and H. So, "Development and optimization of a
resonance-based mechanical dynamic absorber structure for multiple frequencies,"
Journal of Low Frequency Noise, Vibration
and Active Control, vol. 0, no. 0, p. 1461348419855533.
[38] B.
Yi, Y. Q. Zhou, G. H. Yoon, and K. Saitou, "Topology optimization of
functionally-graded lattice structures with buckling constraints," (in
English), Computer Methods in Applied
Mechanics and Engineering, vol. 354, pp. 593-619, Sep 1 2019.
[39] M.
Takalloozadeh and G. H. Yoon, "Topology Optimization Under Stress
Relaxation Effect Using Internal Element Connectivity Parameterization,"
(in English), Journal of Computational
and Nonlinear Dynamics, vol. 14, no. 2, Feb 2019.
[40] G.
H. Yoon, K. H. Kim, and S. J. Hwang, "Development of a survivability
evaluation procedure for bullet penetration into human body," (in
English), Journal of Mechanical Science and
Technology, vol. 32, no. 10, pp. 5039-5047, Oct 2018.
[41] D.
M. Park, J. H. Kim, S. J. Lee, and G. H. Yoon, "Analysis of geometrical
characteristics of CNT-Al composite using molecular dynamics and the modified
rule of mixture (MROM)," (in English), Journal
of Mechanical Science and Technology, vol. 32, no. 12, pp. 5845-5853, Dec
2018.
[42] H.-W.
Jun, J.-W. Lee, G.-H. Yoon, and J. Lee, "Optimal Design of the PMSM
Retaining Plate With 3-D Barrier Structure and Eddy-Current Loss-Reduction
Effect," IEEE Transactions on
Industrial Electronics, vol. 65, no. 2, pp. 1808-1818, 2018.
[43] S.
H. Jeong, J. W. Lee, G. H. Yoon, and D. H. Choi, "Topology optimization
considering the fatigue constraint of variable amplitude load based on the
equivalent static load approach," Applied
Mathematical Modelling, vol. 56, pp. 626-647, 2018.
[44] M.
Ding, N. Sahebgharani, F. Musharavati, F. Jaber, E. Zalnezhad, and G. Yoon,
"Synthesis and properties of HA/ZnO/CNT nanocomposite," Ceramics International, 2018.
[45] G.
H. Yoon and J. S. Mo, "Tailoring a bidirectional negative stiffness (BNS)
structure with mechanical diodes for mechanical metamaterial structures," Smart Materials and Structures, vol. 26,
no. 5, p. 055002, 2017.
[46] G.
H. Yoon, H. Choi, and S. Hur, "Multiphysics topology optimization for
piezoelectric acoustic focuser," Computer
Methods in Applied Mechanics and Engineering, 2017.
[47] G.
H. Yoon, "Brittle and ductile failure constraints of stress-based topology
optimization method for fluid–structure interactions," Computers & Mathematics with
Applications, vol. 74, no. 3, pp. 398-419, 2017.
[48] M.
Takalloozadeh and G. H. Yoon, "Implementation of topological derivative in
the moving morphable components approach," Finite Elements in Analysis and Design, vol. 134, pp. 16-26, 2017.
[49] N.
R. Park, K. H. Kim, J. S. Mo, and G. H. Yoon, "An experimental study on
the effects of the head angle and bullet diameter on the penetration of a
gelatin block," International
Journal of Impact Engineering, vol. 106, pp. 73-85, 2017.
[50] S.
Lee and G. H. Yoon, "Moisture transport in paper passing through the fuser
nip of a laser printer," Cellulose, pp.
1-13, 2017.
[51] J.
W. Lee and G. H. Yoon, "Stress based topology optimization of
reinforcement structure under in-plane load," Computers & Structures, vol. 191, pp. 115-128, 2017.
[52] K.
H. Kim and G. H. Yoon, "Absorption performance optimization of perforated
plate using multiple-sized holes and a porous separating partition," Applied Acoustics, vol. 120, pp. 21-33,
2017.
[53] J.
S. Choi and G. H. Yoon, "Acoustic metamaterials with combined
heterogeneous double-split hollow sphere for noise reduction," Journal of Vibration and Control, p.
1077546317739794, 2017.
[54] G.
H. Yoon, "Topology optimization for turbulent flow with Spalart–Allmaras
model," Computer Methods in Applied
Mechanics and Engineering, vol. 303, pp. 288-311, 2016.
[55] M.
Takalloozadeh and G. H. Yoon, "Development of Pareto topology optimization
considering thermal loads," Computer
Methods in Applied Mechanics and Engineering, 2016.
[56] M.
Tajabadi et al.,
"Electrodeposition of flower-like platinum on electrophoretically grown
nitrogen-doped graphene as a highly sensitive electrochemical non-enzymatic
biosensor for hydrogen peroxide detection," Applied Surface Science, vol. 386, pp. 418-426, 2016.
[57] M.
Sookhakian et al.,
"Layer-by-Layer Electrodeposited Reduced Graphene Oxide-Copper
Nanopolyhedra Films as Efficient Platinum-Free Counter Electrodes in High
Efficiency Dye-Sensitized Solar Cells," Journal of The Electrochemical Society, vol. 163, no. 5, pp.
D154-D159, 2016.
[58] G.
U. Jung, J. H. Kim, N. H. Lim, G. H. Yoon, and J. Y. Han, "Biomechanical
comparison of a novel engine‐driven ridge spreader and conventional ridge splitting techniques,"
Clinical oral implants research, 2016.
[59] D.
Jafarlou et al., "Severe plastic
deformation of tubular AA 6061 via equal channel angular pressing," Materials & Design, vol. 90, pp.
1124-1135, 2016.
[60] B.
K. Choi, G. H. Yoon, and S. Lee, "Molecular dynamics studies of
CNT-reinforced aluminum composites under uniaxial tensile loading," Composites Part B: Engineering, vol. 91,
pp. 119-125, 2016.
[61] G.
H. Yoon, J. S. Mo, K. H. Kim, C. H. Yoon, and N. H. Lim, "Investigation of
bullet penetration in ballistic gelatin via finite element simulation and
experiment," Journal of Mechanical
Science and Technology, vol. 29, no. 9, pp. 3747-3759, 2015.
[62] E.
Mohseni, E. Zalnezhad, A. Bushroa, A. M. Hamouda, B. Goh, and G. Yoon,
"Ti/TiN/HA coating on Ti–6Al–4V for biomedical applications," Ceramics International, vol. 41, no. 10,
pp. 14447-14457, 2015.
[63] J.
W. Lee, G. H. Yoon, and S. H. Jeong, "Topology optimization considering
fatigue life in the frequency domain," Computers
& Mathematics with Applications, vol. 70, no. 8, pp. 1852-1877, 2015.
[64] K.
H. Kim and G. H. Yoon, "Optimal rigid and porous material distributions
for noise barrier by acoustic topology optimization," Journal of Sound and Vibration, vol. 339, pp. 123-142, 2015.
[65] S.
H. Jeong, D.-H. Choi, and G. H. Yoon, "Fatigue and static failure
considerations using a topology optimization method," Applied Mathematical Modelling, vol. 39, no. 3, pp. 1137-1162,
2015.
[66] B.
Huang, H. S. Kim, and G. H. Yoon, "Modeling of a partially debonded piezoelectric
actuator in smart composite laminates," Smart Materials and Structures, vol. 24, no. 7, p. 075013, 2015.
[67] B.
Huang, H. S. Kim, and G. H. Yoon, "Investigation of Actuator Debonding
Effects on Active Control in Smart Composite Laminates," 2015.
[68] G.
H. Yoon, J. H. Kim, K. O. Jung, and J. W. Jung, "Transient quasi-static
Ritz vector (TQSRV) method by Krylov subspaces and eigenvectors for efficient
contact dynamic finite element simulation," Applied Mathematical Modelling, 2014.
[69] G.
H. Yoon and H. S. Kim, "Damage Analysis of Biocomposite Laminates Using
Model Order Reduction," Journal of
Nanoscience and Nanotechnology, vol. 14, no. 10, pp. 7508-7515, 2014.
[70] G.
H. Yoon, "Compliant Topology Optimization for Planar Passive Flap Micro
Valve," Journal of Nanoscience and
Nanotechnology, vol. 14, no. 10, pp. 7585-7591, 2014.
[71] G.
H. Yoon, "Stress-based topology optimization method for steady-state
fluid–structure interaction problems," Computer
Methods in Applied Mechanics and Engineering, vol. 278, pp. 499-523, 2014.
[72] G.
H. Yoon, "Unified Analysis with Mixed Finite Element Formulation for
Acoustic-Porous-Structure Multiphysics System," Journal of Computational Acoustics, 2014.
[73] A.
Takezawa, G. H. Yoon, S. H. Jeong, M. Kobashi, and M. Kitamura,
"Structural topology optimization with strength and heat conduction
constraints," Computer Methods in
Applied Mechanics and Engineering, vol. 276, pp. 341-361, 2014.
[74] S.
Park, S. H. Jeong, G. H. Yoon, A. A. Groenwold, and D.-H. Choi, "A globally
convergent sequential convex programming using an enhanced two-point diagonal
quadratic approximation for structural optimization," Structural and Multidisciplinary Optimization, vol. 50, no. 5, pp.
739-753, 2014.
[75] S.
H. Jeong, G. H. Yoon, A. Takezawa, and D.-H. Choi, "Development of a novel
phase-field method for local stress-based shape and topology
optimization," Computers &
Structures, vol. 132, pp. 84-98, 2014.
[76] S.
H. Jeong, J. C. Heo, and G. H. Yoon, "Motion Structural Optimization
Strategy for Rhombic Element Based Foldable Structure," Advances in Mechanical Engineering, 2014.
[77] S.
H. Jeong, D.-H. Choi, and G. H. Yoon, "Separable stress interpolation
scheme for stress-based topology optimization with multiple homogenous
materials," Finite Elements in
Analysis and Design, vol. 82, pp. 16-31, 2014.
[78] G.
H. Yoon, "Acoustic topology optimization of fibrous material with
Delany–Bazley empirical material formulation," Journal of Sound and Vibration, vol. 332, no. 5, pp. 1172-1187,
2013.
[79] S.
J. Moon and G. H. Yoon, "A newly developed qp-relaxation method for
element connectivity parameterization to achieve stress-based topology
optimization for geometrically nonlinear structures," Computer Methods in Applied Mechanics and Engineering, vol. 265,
pp. 226-241, 2013.
[80] J.
Kim et al., "Development of
optimal diaphragm-based pulsation damper structure for high-pressure GDI pump
systems through design of experiments," Mechatronics, vol. 23, no. 3, pp. 369-380, 2013.
[81] S.
H. Jeong, S. H. Park, D.-H. Choi, and G. H. Yoon, "Toward a stress-based
topology optimization procedure with indirect calculation of internal finite
element information," Computers
& Mathematics with Applications, vol. 66, no. 6, pp. 1065-1081, 10//
2013.
[82] J.
C. Heo and G. H. Yoon, "Size and configuration syntheses of rigid-link
mechanisms with multiple rotary actuators using the constraint force design
method," Mechanism and Machine
Theory, vol. 64, pp. 18-38, 2013.
[83] G.
H. Yoon and J. C. Heo, "Constraint force design method for topology
optimization of planar rigid-body mechanisms," Computer-Aided Design, vol. 44, no. 12, pp. 1277-1296, 2012.
[84] G.
H. Yoon, "Toward a multifrequency quasi‐static Ritz vector method for
frequency‐dependent acoustic system application," International journal for numerical methods in engineering, vol.
89, no. 11, pp. 1451-1470, 2012.
[85] G.
H. Yoon, "Topological layout design of electro-fluid-thermal-compliant
actuator," Computer Methods in
Applied Mechanics and Engineering, vol. 209, pp. 28-44, 2012.
[86] J.
Y. Noh and G. H. Yoon, "Topology optimization of piezoelectric energy
harvesting devices considering static and harmonic dynamic loads," Advances in Engineering Software, vol.
53, pp. 45-60, 2012.
[87] S.
H. Jeong, S. H. Park, D.-H. Choi, and G. H. Yoon, "Topology optimization
considering static failure theories for ductile and brittle materials," Computers & Structures, vol. 110,
pp. 116-132, 2012.
[88] G.
H. Yoon, J. Y. Noh, and Y. Kim, "Topology optimization of geometrically
nonlinear structures tracing given load-displacement curves," Journal of Mechanics of Materials and
Structures, vol. 6, no. 1, pp. 605-625, 2011.
[89] G.
H. Yoon, "Topology optimization for nonlinear dynamic problem with
multiple materials and material-dependent boundary condition," Finite Elements in Analysis and Design, vol.
47, no. 7, pp. 753-763, 2011.
[90] M.
Langelaar, G. Yoon, Y. Kim, and F. Van Keulen, "Topology optimization of
planar shape memory alloy thermal actuators using element connectivity
parameterization," International
Journal for Numerical Methods in Engineering, vol. 88, no. 9, pp. 817-840,
2011.
[91] G.
H. Yoon and J. Park, "Topological design of electrode shapes for
dielectrophoresis based devices," Journal
of Electrostatics, vol. 68, no. 6, pp. 475-486, 2010.
[92] G.
H. Yoon, "Topological design of heat dissipating structure with forced
convective heat transfer," Journal
of Mechanical Science and Technology, vol. 24, no. 6, pp. 1225-1233, 2010.
[93] G.
H. Yoon, "Structural topology optimization for frequency response problem
using model reduction schemes," Computer
Methods in Applied Mechanics and Engineering, vol. 199, no. 25, pp.
1744-1763, 2010.
[94] G.
H. Yoon, "Topology optimization for stationary fluid–structure interaction
problems using a new monolithic formulation," International journal for numerical methods in engineering, vol.
82, no. 5, pp. 591-616, 2010.
[95] G.
H. Yoon, "Maximizing the fundamental eigenfrequency of geometrically
nonlinear structures by topology optimization based on element connectivity
parameterization," Computers &
structures, vol. 88, no. 1, pp. 120-133, 2010.
[96] N.
Van Dijk, G. Yoon, F. Van Keulen, and M. Langelaar, "A level-set based
topology optimization using the element connectivity parameterization
method," Structural and
Multidisciplinary Optimization, vol. 42, no. 2, pp. 269-282, 2010.
[97] G.
H. Yoon and O. Sigmund, "A monolithic approach for topology optimization
of electrostatically actuated devices," Computer Methods in Applied Mechanics and Engineering, vol. 197,
no. 45, pp. 4062-4075, 2008.
[98] G.
H. Yoon, Y. Y. Kim, M. Langelaar, and F. van Keulen, "Theoretical aspects
of the internal element connectivity parameterization approach for topology
optimization," International journal
for numerical methods in engineering, vol. 76, no. 6, pp. 775-797, 2008.
[99] S.
Heo, G. H. Yoon, and Y. Y. Kim, "Minimum scale controlled topology
optimization and experimental test of a micro thermal actuator," Sensors and Actuators A: Physical, vol.
141, no. 2, pp. 603-609, 2008.
[100] G.
H. Yoon and Y. Y. Kim, "Topology optimization of material‐nonlinear
continuum structures by the element connectivity parameterization," International journal for numerical methods
in engineering, vol. 69, no. 10, pp. 2196-2218, 2007.
[101] G.
H. Yoon, Y. S. Joung, and Y. Y. Kim, "Optimal layout design of three‐dimensional
geometrically non‐linear structures using the element connectivity parameterization
method," International journal for
numerical methods in engineering, vol. 69, no. 6, pp. 1278-1304, 2007.
[102] G.
H. Yoon, J. S. Jensen, and O. Sigmund, "Topology optimization of
acoustic–structure interaction problems using a mixed finite element
formulation," International journal
for numerical methods in engineering, vol. 70, no. 9, pp. 1049-1075, 2007.
[103] G.
Yoon, Y. K. Park, and Y. Kim, "Element stacking method for topology
optimization with material-dependent boundary and loading conditions," Journal of mechanics of materials and
structures, vol. 2, no. 5, pp. 883-895, 2007.
[104] G.
H. Yoon and Y. Y. Kim, "Triangular checkerboard control using a wavelet‐based method in
topology optimization," International
journal for numerical methods in engineering, vol. 63, no. 1, pp. 103-121,
2005.
[105] G.
H. Yoon and Y. Y. Kim, "Element connectivity parameterization for topology
optimization of geometrically nonlinear structures," International journal of solids and structures, vol. 42, no. 7, pp.
1983-2009, 2005.
[106] G.
H. Yoon, S. Heo, and Y. Y. Kim, "Minimum thickness control at various
levels for topology optimization using the wavelet method," International journal of solids and
structures, vol. 42, no. 23, pp. 5945-5970, 2005.
[107] I.
Lee, G. H. Yoon, J. Park, S. Seok, K. Chun, and K.-I. Lee, "Development
and analysis of the vertical capacitive accelerometer," Sensors and Actuators A: Physical, vol.
119, no. 1, pp. 8-18, 2005.
[108] H.
Kim, C. In, G. Yoon, and J. Kim, "Design and fabrication of a micro PZT
cantilever array actuator for applications in fluidic systems," Journal of mechanical science and
technology, vol. 19, no. 8, pp. 1544-1553, 2005.
[109] H.
Kim, C. In, G. Yoon, and J. Kim, "A slim type microvalve driven by PZT
films," Sensors and Actuators A:
Physical, vol. 121, no. 1, pp. 162-171, 2005.
[110] G.
Ho Yoon and Y. Young Kim, "The element connectivity parameterization
formulation for the topology design optimization of multiphysics systems,"
International Journal for Numerical
Methods in Engineering, vol. 64, no. 12, pp. 1649-1677, 2005.
[111] G.
Yoon, Y. Kim, M. P. Bendsøe, and O. Sigmund, "Hinge-free topology
optimization with embedded translation-invariant differentiable wavelet
shrinkage," Structural and
Multidisciplinary Optimization, vol. 27, no. 3, pp. 139-150, 2004.
[112] G.
H. Yoon and Y. Y. Kim, "The role of S-shape mapping functions in the SIMP
approach for topology optimization," KSME
international journal, vol. 17, no. 10, pp. 1496-1506, 2003.
[113] G.
H. Yoon and Y. Y. Kim, "Optimal design of the optical pickup suspension
plates using topology optimization," AIAA
journal, vol. 41, no. 9, pp. 1841-1843, 2003.
[114] Y.
Y. Kim and G. H. Yoon, "Multi-resolution multi-scale topology
optimization—a new paradigm," International
Journal of Solids and Structures, vol. 37, no. 39, pp. 5529-5559, 2000.